The GP8-Set Brush Kit is a comprehensive assembly designed to keep your StemShine GP8 glass polishing machine operating at peak performance. This kit includes all the polishing heads you need to effectively remove smudges and wick away water, leaving your glassware with a dazzling shine that’s sure to impress.

Key Features:

• Complete Brush Assembly:
  The kit includes a total of 8 brushes in 3 different sizes, each specifically designed for optimal placement within the unit:

  • Three Red Brushes in the back for thorough polishing.
  • Two Green Brushes in the middle for balanced cleaning.
  • Three Yellow Brushes in the front for the finishing touch.

• Soft Synthetic Polymer:
  Each brush is made from a soft, synthetic polymer that gently polishes glassware, minimizing stress and reducing the risk of breakage.

• No Polishing Liquid Needed:
  The GP8 brushes are designed to polish both the inside and outside of your glasses without the need for any polishing liquid, ensuring a clean, polished, and sparkling finish every time.

Keep your glass polishing machine running smoothly and efficiently with the StemShine GP8 Replacement Brush Kit, ensuring your glassware is always in top condition and ready for service.

StemShine GP8 Replacement and Cleaning Guide

Proper maintenance of your StemShine GP8 brushes is essential for ensuring optimal performance and longevity. Follow this guide for replacing and cleaning the brushes to keep your glass polishing machine operating at its best.

Replacement Guide

1. Remove Old Brushes
   Begin by turning off the machine and disconnecting it from the power source. Carefully remove each of the 8 brushes from their designated positions inside the unit.

2. Install New Brushes
   The GP8-Set Brush Kit includes 8 brushes in 3 different sizes:

   • Three Red Brushes: Place these in the back positions.
   • Two Green Brushes: Install these in the middle positions.
   • Three Yellow Brushes: Attach these to the front positions.

   Ensure each brush is securely fitted into its designated slot.

3. Reconnect Power and Test
   Once the new brushes are installed, reconnect the machine to the power source. Turn on the machine and run it briefly to ensure the brushes are functioning properly.

Cleaning Guide

Regular cleaning of the brushes is crucial to maintain the efficiency and quality of your glass polishing machine.

1. Nightly Cleaning Routine

   • Remove and Wash: At the end of each day, remove the brushes from the StemShine GP8. Hand wash them thoroughly with dish soap, ensuring you create a good lather to clean all surfaces.
   • Rinse Thoroughly: Rinse the brushes under running water until all soap residue is removed. This step is vital, as leftover soap can transfer to your glassware during polishing.
   • Air Dry Overnight: Place the brushes in a well-ventilated area to air dry overnight.

2. Morning Reassembly

   • Reattach Brushes: In the morning, reattach the dry brushes to the machine. If any moisture remains, the machine's heating filament will quickly dry the brushes during operation.

3. Monthly Deep Cleaning

   • Soak and Clean: Once a month, soak the brushes in warm soapy water for a deeper clean. Follow the same rinsing and drying procedures to ensure they are thoroughly cleaned and free from any buildup.

By following this maintenance routine, you’ll keep your StemShine GP8 brushes in top condition, ensuring consistently polished and spotless glassware.